No products
CHASIS 3D
- PARTS 1/32
- PEÇAS 1/24
- CARS 1/32
- MAINTENANCE
- ELECTRONICS
- DECORATION
- TRACKS (CIRCUIT)
- BURAGO MINIATURES
Catalog
-
Lancia Delta S4
38,07 € -10% 42,30 €
New products
-
Rim 16.9 x 10 mm. URANUS EVO
11,12 € -
-
-
Universal SPORT Guide -RKS-
4,10 € -
-
Torque screwdriver with 1.5 tip
17,60 € -
Torque screwdriver with 1.3 tip
17,60 € -
-
Allen stud M2.5 x 2
4,90 € -
M2 STAINLESS STEEL nut.
2,58 € -
M2 self-locking INOX nut.
4,96 € -
-
-
CHASIS 3D There are 134 products.
13,50 € In Stock
12,50 € In Stock
12,50 € Out of stock
10,70 € Out of stockPorsche 911/991 chassis compatible...
The chassis comes with a spacer washer, because Kat has detected that there are two types of bodywork, one with a long rear pin, which does not need to be fitted with the spacer (it can be fitted with a short body bolt) and the other with a rear pin. short and is for the latter said separator mounting it on the chassis and with long body bolts. Car not...
10,70 €Out of stock
9,00 € In StockChassis Murcielago (Black Bull) Pro SS...
A very flexible chassis and specifically designed for linear motor support and anglewinder Slot.it and Scaleauto anglewinder support ref. SC6528C, SC6535C, SC6536C, SC6537C The option to put Scaleauto motor support has been added because you want to add screws or side suspensions. Body not included
9,00 €In Stock
10,60 € In Stock
12,50 € In Stock
12,60 € Out of stock
12,60 € In Stock
12,60 € Out of stock
15,80 € Out of stock
15,80 € Out of stock
12,50 € In StockChasis Renault 4 Block Lineal EVO...
This chassis is designed for 15 to 15.5mm rims and for rear tires of the same Low Sprint brand. The body is not for sale
12,50 €In Stock
12,50 € Out of stockAnglewinder Mitsubishi Lancer chassis...
The chassis is delivered with a grille for the front air intake of the body, engine screws and built-in bearings. With the AFR & ASB system for greater traction and stability. Body not included
12,50 €Out of stock
10,60 € Out of stock
10,60 € Out of stock
9,00 € Out of stockGT3 Italia SS Pro Super Soft Compatible...
A very flexible chassis designed specifically for linear motor support and anglewinder Slot.it and Scaleauto anglewinder support ref. SC6528C, SC6535C, SC6536C, SC6537C Body not included
9,00 €Out of stock
12,50 € In Stock
12,50 € In StockAvant-compatible 207 Linear EVO chassis
With the absence of screws in the guide bracket and the ASB stabilizing / ridding bar system to achieve greater traction and stability
12,50 €In Stock
11,60 € Out of stockLancia Delta Integrale Linear chassis...
With AFR & ASB system for greater front and rear traction and better cornering
11,60 €Out of stock
11,60 € Out of stock
12,50 € In StockDS3 AW EVO rally Scalextric compatible...
Scalextric (SCX) compatible With AFR & ASB system for greater traction The car in the photo is not for sale
12,50 €In Stock
12,50 € Out of stock
12,50 € In Stock
12,50 € Out of stockBlock Linear C4 compatible Ninco chassis
With ASB system (ridiculous / stabilizing rear bar) The body is not for sale
12,50 €Out of stock
12,50 € In StockBlock AW C4 compatible Ninco chassis
With ASB system (ridiculous / stabilizing rear bar) The body is not for sale
12,50 €In Stock
11,00 € In StockAW Chassis Tomaso Panther compatible with...
The manufacturer recommends double flange bearings reference K / 001C
11,00 €In Stock
11,00 € Out of stockLinear De Tomaso Pantera chassis...
The manufacturer recommends double-ended pestaña reference K / 001C
11,00 €Out of stock
9,99 € In StockChassis AW Subaru compatível MSC K / 001WR
The Kat Racing brand has manufactured in the rear parts for the support of the bearings. The AW model has a cover with three screws. The recommended guides for mounting the chassis are Sloting Plus brand reference 101001 and 101002, Scaleauto SC1608 and NSR 4842.It also recommends 17.5mm crowns and 5.5mm or less pinions and Tectime guide spring reference...
9,99 €In Stock
12,50 € Out of stockAudi Quattro AW chassis compatible with Fly
Chassis with AFR & ASB system The car is not for sale
12,50 €Out of stock
Follow us